Manus-Bond 75-Am fast skinning

Manus-Bond 75-AM Fast Skinning exhibits adhesion to many substrates including aluminum, brass, steel, granite, marble, wood and many plastics. Cures fast, even at low temperatures. 75-AM Fast Skinning is highly weather resistant and can be painted with most paints. Contains no solvents or isocyanates and is non-yellowing. USDA accepted. 

Technical Data

Skin Time
5-10 minutes
700,000-800,000 cps
hardness (shore a)
Tensile Strength
225 psi
Lap Shear
275 psi
Service Temperature
-75F to 350F
UV Ratings
No change at 2000 hours



10.3 fl.oz. cartridge, 10.3 and 20 fl.oz. sausage packs, 1 gallon, 2 gallon, 5 gallon and 55 gallon containers.

Surface Preparation

Apply to clean, dry surfaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying 75-AM. Testing a small area for compatibility is recommended.


Cured product may be painted with most industrial & consumer paints. Testing prior to painting is recommended.  

Storage Life

9 months in unopened containers at temperatures not exceeding 80ºF.


Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin. See MSDS for additional information. KEEP OUT OF REACH FROM CHILDREN.

Technical Service

Manus technical representatives are always available to provide assistance. Please contact our Technical Service Department with your questions or requests for specific applications.

Limited Warranty

Any goods prove defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product’s use, handling and storage.