Manus-Bond 75-AM High Grab

Surface Preparations and Directions of Use

The surfaces to be applied on should be clean, dry, and free from dust and grease. The ability for the adhesive to bond is only as good as the substrate it is applied on. It is advisable to carry out preliminary adhesion tests on the substrate. Avoid exposure of unused material to air or moisture. A premium, high-ratio caulking gun that is suitable for high viscosity materials is highly recommended. Please contact Manus Sales Department or your Manus representative for information on premium, high-ratio caulking guns.

Precautions

Some applications may not be compatible with this product. In most cases, no primer is required. Some cleaners or solvents may not be compatible with this product. Testing suitability for intended application before proceeding with full application is recommended. Do not use in direct contact with fire or in long-term high-temperature applications. Use with adequate ventilation. Inhalation of vapor during application and cure may cause eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin. See SDS for additional information. KEEP OUT OF REACH FROM CHILDREN.

Clean Up

Excess cured material must be cut or scraped away followed by wiping with isopropyl alcohol, aromatic or ketone-type solvents. The use of these solvents (or other solvents) may be hazardous to your health. KEEP AWAY FROM OPEN FLAME. Tools and application equipment may be cleaned with the same solvent. Follow the precautions and instructions of the solvent manufacturers.

User Evaluation

Testing for substrate compatibility and adhesion must be performed by the user before proceeding with full application or incorporation. Product may not be compatible with all substrates, surfaces, uses, or applications.

Product Storage

The product has shelf life of 12 months after production date in its original packaging (unopened) in a cool, dry place. For maximum shelf life, store unopened containers at temperatures not exceeding 80oF in cool, dry conditions. Keep away from wet areas, direct sunlight and heat sources.

Packaging and Sizes

Xtreme Grab is available in 9.5 fl.oz./290 ml cartridge or 20 fl.oz. sausage packs. Other packaging or colors available upon request.

Technical Service

Manus technical representatives are available to provide assistance. Please contact our Technical Service Department with your questions or requests for specific applications.

Limited Warranty

Any goods proved defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling, and storage. To the best of Manus's knowledge, the information contained in this technical data sheet is correct and based on our knowledge and experience to date. Accordingly, the information cannot be used as a guarantee due to the different materials present on the market and that the application conditions are not under our direct control. Manus may modify or update this technical data sheet without notice and any obligation to notify any user of changes. Customers should verify that they have the latest version.