Manus-Bond Sip-Seal VLM
Manus-Bond SIP-seal VLM (very low modulus) exhibits excellent adhesion to many substrates including aluminum, brass, steel, Kynar®, Galvalume®, painted surfaces, vinyl, FRP, glass, concrete, marble, OSB, EPS, wood and many plastics. Cures fast, even at low temperatures. Manus-Bond SIP-seal VLM is highly weather resistant and can be painted with most paints. Manufactured from high grade polyether technology Manus-Bond SIP-seal contains no solvents or isocyanates and is non yellowing. Conforms to ASTM C920, Type S, Grade NS, Class 50, Use T, NT, M, A, G and O. USDA accepted.
Technical Details
Specific Gravity
1.40-1.44
Color
White, Gray, Black
*Other colors available upon request
Skin Time @ 75ºF & 50%RH
30 minutes
Cure Rate @ 75ºF & 50%RH for 24 hours
0.125”
Hardness, Shore A
15
Sag
Nil
100% Modulus
ASTM D412 *Rate = 2”/minute
20 psi
Tensile Strength
ASTM D412
125 psi
% Elongation
1200%
Peel Strength
ASTM C794 (steel to stainless steel)
23 pli
Service Temperature Range
-75ºF to 300ºF
Water Vapor Transmission (ASTM E96)
1.59 perm-inch
Movement Capability
+50%
UV Resistance
Excellent
VOC Content
12 grams/liter
Documentation
Compatible Materials
Additional Details
Packaging
10.1 and 28fl.oz. cartridges, 10 and 20 fl.oz. sausage packs, 1, 5 and 52 gallon containers
Surface Preparation
Apply to clean, dry surfaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying product. Some substrate materials may not be compatible with this product. Testing substrate compatibility with this product before full application is recommended.
Painting & Application
Cured product may be painted with most industrial & consumer paints. Testing prior to painting is recommended. Apply in continuous beads in accordance with SIP manufacturer’s manual.
Storage Life
For maximum shelf life, store unopened product at or below 80ºF.
12 months = cartridges and sausage packs
6 months = 1, 5 and 55 gallon containers
Precautions
Some applications may not be compatible with this product. Testing suitability for intended application before proceeding with full application is recommended. Use with adequate ventilation. Inhalation of vapor during application and cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation
persists, consult a physician. Avoid repeated, prolonged contact with skin. See MSDS for additional information. KEEP OUT OF REACH FROM CHILDREN.
Technical Service
Manus technical representatives are always available to provide assistance. Please contact our Technical Service Department with your questions or requests for specific applications.
Limited Warranty
Any goods prove defective will be replaced or the purchase price refunded. The limited warranty described herein is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product’s use, handling and storage.
